Thanks nervis1.
Do you mean the same center drill I would use on my lathe or something else?
Norman
Results 1 to 13 of 13
Hybrid View
-
12-02-2004, 04:47 AM #1
Registered
- Join Date
- Jul 2003
- Posts
- 138
Center drill
-
12-02-2004, 04:59 AM #2
Registered
- Join Date
- Aug 2003
- Posts
- 812
Yep, the same stuff. Just make sure you locate that hole where you want it. What machine are you using, drill press? Mill?
If a mill then you can edge find the center of the bar. Remember that round stock (drill rod is probably right on) is rarely exact in size, measure it first and do the edge finding with that measurement.
-
12-02-2004, 05:06 AM #3
Registered
- Join Date
- Apr 2003
- Posts
- 1873
Norm I promise I won't bloat your thread past this
Dave, how you coming on the 4 axis ?
Easy,Hard,Frustrating, or going to sell it to Ken for $300
Reply With QuoteSimilar Threads
-
Removal of the drill press depth stop threaded rod
By devinchi in forum Shopmaster/ShoptaskReplies: 4Last Post: 03-14-2010, 03:10 PM -
Drill Rod For Linear Ways
By heilcnc in forum Uncategorised MetalWorking MachinesReplies: 3Last Post: 02-28-2005, 06:41 PM -
Drill Rod Diameter Recommendations
By grempel1 in forum CNC Wire Foam Cutter MachinesReplies: 6Last Post: 11-19-2004, 04:28 PM -
Thomson vs. ground drill rod
By TommyB in forum DIY CNC Router Table MachinesReplies: 10Last Post: 03-21-2004, 05:08 PM -
What type of drill bits for lathe?
By James04 in forum Uncategorised MetalWorking MachinesReplies: 15Last Post: 05-10-2003, 06:59 PM
Posting Permissions
