[wang]

oooh, fancy red text
thanks for your patience.

so, for the sake of anyone else reading...

- 92mm frame
- rated 1.1nm AT 10000rpm
- 1100w
- about 50% extra overload torque before stall (based on the graph of the 6000rpm motor)
- 110v or 220v input to the controller(Wrong)
AC 110V into Controller ----DC150v into motor
or
AC220v into Controller -----DC300v into motor
- runs about 110C at rated torque and speed so a fan is a good idea if the motor is in a housing You are right！

all correct?

so, i guess my question remaining, what torque does it have at lower speeds... says 5000rpm, and 2000rpm. i assume it will be a little more than 1.1nm? no！Torque equivalent to the power divided by speed *10

in any case, does seem like it would fit my needs perfectly. what will the pricing be on 1 motor and controller shipped to canada? you can private message me the price if you dont want it in the public thread.

please give me your email,i will email you!