There's a couple ways to do this. You can also use a G32 (tapered thread) cycle. My notes on how to do these are on my blog:
www.cnccookbook.com
Search "Higbee".
Best,
BW
There's a couple ways to do this. You can also use a G32 (tapered thread) cycle. My notes on how to do these are on my blog:
www.cnccookbook.com
Search "Higbee".
Best,
BW
Try G-Wizard Machinist's Calculator for free:
http://www.cnccookbook.com/CCGWizard.html