Thanks Zax for your quick response. I will check to see if it cracked. If it is electrical how would I fix that, would I have to send it to someone or is it an easy fix?
Thanks again!
Thread: Laser stopped firing - HX40B
Results 1 to 20 of 31
Hybrid View
-
02-16-2010, 11:59 PM #1
Registered
- Join Date
- Jul 2009
- Posts
- 14
-
02-17-2010, 12:35 AM #2
Registered
- Join Date
- Dec 2008
- Posts
- 1258
If the tube is intact, I would check the interlock wiring. You can check for continuity as the switches are in series. There should be switches on the tube, laser and PSU enclosures.
The other place to check is the laser PSU, to see if any of the indicators are on (it should have 1 or more LED's, depending on model).
If the LED's aren't on at the PSU, disconnect power and look for any sign of burning. Be careful when the PSU is energized as it's high voltage.
Zax.
Reply With QuoteSimilar Threads
-
HX40B - what are the best settings
By shazz in forum Laser Engraving / Cutting Machine General TopicsReplies: 3Last Post: 03-29-2011, 01:57 PM -
hx40b
By nazirabd in forum Laser Engraving / Cutting Machine General TopicsReplies: 7Last Post: 05-19-2010, 08:38 AM -
Y Axis Stopped
By ranchak in forum Bridgeport / Hardinge MillsReplies: 5Last Post: 01-04-2010, 05:06 AM -
SX3 Stopped Working
By mikemill in forum Syil ProductsReplies: 13Last Post: 01-09-2009, 04:54 PM -
Wiring done,firing up the system
By watsonstudios in forum Automation Technology ProductsReplies: 1Last Post: 06-14-2007, 06:32 PM
Tags for this Thread
Posting Permissions
