Originally Posted by
jstucken
I have a 1995 HAAS VF2. Lately I have had problems with the tool changer Alarming out. It pulls up alarm 113( I think). Every time I do a tool change with a tool in the spindle, the Carrusel moves to grab the tool but alarms out after moving about 2 or 3 inches. Then if you do the tool changer restore and take the tool out. Clear the alarm, Then try the tool change with out the tool in spindle it will go ahead and do the tool change. What would be causing this? Do I need to adjust the rollers on the carrusel? Any one else have this problem.
Thanks in advance.
Justin Stuckenschneider