Work Principle of laser engraving machine - laser engraving and cutting, the process is very simple, like using the computer and printer to print on paper.Win98/Win2000/WinXP You can Win98/Win2000/WinXP environment using a variety of graphics processing software, such as CorelDraw, etc. to design, scanning of graphics, vector illustrations and a variety of CAD files can easily "print" to the engraving machine in the. The only difference is, print the toner to the paper coating, while the laser is shining a laser engraving wood, Kerouac tablets, plastic sheeting, metal, stone and other materials on almost all.
from side to side, each carving out a series of points formed by the line, and then the laser moves up and down while carving out a number of lines, and finally full-page image or text. Scan graphics, text and vector graphics using the lattice can be carved.
Vector cutting and engraving different lattice, vector cutting is the outer contour line in the graphics were. We usually use this in wood, Kerouac grain, paper and other materials to penetrate the cut surface can also be carried out in a variety of marking operations.
Engraving speed: engraving speed refers to the speed of laser head movement, usually IPS (inches / sec) that bring high-speed productivity. Speed is also used to control the cutting depth, for a particular laser intensity, the slower the speed, depth of cutting or carving the greater. You can use engraving machine panel adjust the speed, the computer can also be used to adjust the print driver. 1% to 100% of the range of adjustment is 1%. Hummer machine [/URL]advanced motion control system can make your high-speed carving, still get the quality of ultra-fine engraving
Engraving strength: strength that shines on the carving surface laser intensity. Rate for a particular sculpture, the greater the intensity, depth of cutting or carving the greater. You can use engraving machine panel intensity adjustment, the computer can also be used to adjust the print driver. 1% to 100% of the range of adjustment is 1%. The greater the intensity equal to the greater speed. Depth of cut deeper
laser beam spot size can be used to adjust the lens of different focal lengths. Small spot of the lens for high resolution engraving. Great spot for the low-resolution lens engraving, but for vector cutting, it is the best option. The new equipment standard is 2.0 inch lens. The spot size in the middle for various occasions.
Can be carved materials : wood, glass, metal plates, glass, stone, crystal, Corian, paper, color plates, aluminum, leather, resin, spray metal.
http://perfectlaser.en.alibaba.com
http://www.perfectlaser.net
E-mail: [email protected]
Address: Phoenix Science& technology Zone, No 154,
Zhongbei Road, Wuchang District, Wuhan City, Hubei, China
phone:+ 86-27-86791986
Fax: + 86-27-86775865