[vs3074]

Hey guys i also have a problem with my hx720 set up throgh the usb port on com 1 running windows 7 and artcut software everything drtected and working on the computer side but the plotter itself isn't working, when switched on the monitor reads speed 500 and pressure 100 and the cutting tip is vibrating up and down but noting else happens i hold down the reste button and it stops let go of the reset button same thing happens, none of the other buttins are working, anyone got any advice?
regards Bill

Can you please share the driver for Win7. I got 2 plotters and cannot use either due to win7 driver

[crackawoody]

Can you please share the driver for Win7. I got 2 plotters and cannot use either due to win7 driver

I found artcut to be the problem i am now using winpcsign and no problems with usb ports. the only problem i have with the rabbit hx720 is trying to stop the vinyl form crunching up as it cuts.

[Dodge69]

Hi, new to this forum but not new to the woes of the HX720 and it being temperamental. I have been using Artcut at work for 5 years on an XP machine and it's been relatively good for cutting decals and easier to use than another more expensive program I have.

Anyway, the other day my work computer decided it doesn't like the drivers that were originally installed and won't recognise the plotter any more or the drivers on the original disk. So I bit the bullet and purchased a new laptop only to find that Windows 7 didnt like the drivers either.
So many wasted hours of frustration!

The breakthrough IS that I was sent the new drivers last night from the guy I bought the plotter from a few years ago and it now works on my laptop. Aparently the driver is good for other OS's too so I'll give it a shot on my desktop when I get to work this morning and report back.
So if you're in need of the driver I can help.

Cheers
Paul

[donat]

Hi,

I'am new on this forum, i'm from france, sorry for my english.

I've been using my plotter hx 720 for months on windows xp, using the serial port.

Unfortunately, i bought a new pc running windows 7 64bits and it doesn't have serial port. So i would like to use the usb with my plotter but i can't find drivers on the internet.

If you could help me, i would be very please.

Merci

[boostrd]

HEY DODGE 69 I HAVE A RABBIT AND NEED THE DRIVER CAN YOU STILL HELP?

[gem56]

It seems i,m not the only one having problems with these cutters

I have a HX960 the machine willnot remember computer settings ,I have to delete software and reinstall before every use , the cutter willnot import from a printer or scanner

I tried to contact Rabbit they willnot return any emails

I have spent hundreds of dollars on computer experts who all are saying
it is a internal software problem

I have know taken steps to have the import of all rabbit products banned into Australia and stop the sale in Australia

To supply products in Australia the supplier must have service and product back-up available to the end users

Not happy