The circuit layout I've seen for the SX3 indicates it has hall sensors.
The Z axis has more travel on the SX3.
Thread: Speed Control For SX3 ?
Results 1 to 20 of 136
Threaded View
-
05-17-2011, 06:02 PM #7
Registered
- Join Date
- Nov 2008
- Posts
- 11
Reply With QuoteSimilar Threads
-
180V DC Motor Speed control Neco speed controller card - PLEASE HELP
By gridevolver in forum CNC Machine Related ElectronicsReplies: 5Last Post: 01-22-2019, 06:44 PM -
Damp? Sieg X1 speed control and stepper control.
By Memran in forum CNC Machine Related ElectronicsReplies: 1Last Post: 02-05-2014, 10:16 PM -
Cutting speed locked to Z torch height control speed
By Beefy in forum Mach Plasma / LaserReplies: 1Last Post: 02-15-2010, 12:14 AM -
Seig x2 Speed Control and c6 Control Board
By skmetal7 in forum Benchtop MachinesReplies: 2Last Post: 04-21-2008, 09:17 PM -
BPSeriesI / Centroid control- Spindle speed all out of whack with speed dial?
By peter.blais in forum Bridgeport / Hardinge MillsReplies: 9Last Post: 08-08-2006, 09:29 AM
Tags for this Thread
Posting Permissions
