Originally Posted by
boatlover
Larry please post pictures of you machine so we can see what you have which will allow us to help you better. Don't worry about the wiring if you take it one step at a time it's pretty easy.
I agree! We all love pictures.
Mark, I love your ATC! I agree that it's really helpful with a cnc lathe so you can program the tool locations. My changer holds 4 square tools and 4 round bits such as boring bars. Right now I have been just using one tool and haven't taken the time to program the locations of each tool. To be honest I'm a little confused on how to program them and to me it looks like I need to have the home limit switches set up so the lathe can auto home each axis when it's first turned on as it doesn't keep it's settings when powered down.
Also I have read that Mach 3 isn't set up to run a ATC and you have to write your own program. I have my tool changer set up so I can advance the tool by pressing the + key on my keyboard. I just plan to put a pause in my program when a tool change is needed and manually press the + key until the correct tool jogs into place. Some day I will try to write the program to get it working, but I'm waiting for Mach 4 to come out first as it might have a tool changer feature.
Not true at all. You just either need to get a macro that does the specific rotation for each tool. The quantity of tools in a changer are all variables that have to be accounted for in the macro. There are a few other changes within Mach and your post processor to get the correct code. Though I dont know how to write one, I have one in my Dyna and it will advance according to the called tool. Hoss, RWSkinner, Ray and many others have tool changers running from Mach.
Here is a picture of the inside of my tool changer. As you can see there is a locking leaver so the turret can be locked into position by turing the motor back a little. This is why a program to turn the tool changer will take a little time to write as the tool needs to advance and then turn back to lock it into place. My tool changer also has a micro switch inside which clicks every full rotation. I'm guessing that Prolight used this as a type of home switch.
Actually what I believe you are seeing is a pawl that is electrically activated to allow the tool changer to be bidirectional. If you dont hook it up the changer can only go one way and has to back up. Very similar to the Dyna. MRM has a good build log on a DM3000. He explains the use of that pawl and actuator. IIRC it was a 3 volt switch. Seems like he burnt it up. Might want to read about that part first. I have the macro he uses on his video but it is a single direction macro and is time consuming. Hope this helps. I personally think having limit and homing switches can only increase your awareness of position or repeatability and accuracy has to be better. Maybe if only a little.
Dale P.