Originally Posted by
shaffin
Hello,
I just got my JCUT-6090B with linear rails but it has ballscrew (on all 3 axis) instead of racks. I also got the 2.2Kw spindle on it. I chose to go with the Mach3 controller.
The problem I am facing is that when I connect the controller to power, I can hear a hissing sound (assuming that the motors are engaged), but when I connect the LPT cable and start Mach3, the machine does not jog.
I am thinking that this is a Mach3 setup, can someone who has a similar machine please share a Mach3 configuration file to help me with the setup please.
Thanks,
Sam.