587,933 active members*
4,366 visitors online*
Register for free
Login

Thread: Mitsubishi Communication Issue

Results 1 to 2 of 2
  1. 11-08-2011, 02:41 PM #1
    rylanrouge
    rylanrouge is offline Registered
    Join Date
    Jan 2010
    Posts
    24

    Mitsubishi Communication Issue

    I'm having an issue inputting a program from a laptop to the CNC (Mitsubishi 500-meldas control), using RS232 cable. I'm able to output programs without any problems. Why am I able to get programs out of the CNC, but not put any in? Is there a particular setting I need to look at? I have the baudrate set, stop bits, and parity... any suggestions? Thanks.
    Reply With Quote Reply With Quote
  2. 11-08-2011, 11:48 PM #2
    camsys
    camsys is offline Registered
    Join Date
    Jan 2011
    Posts
    0
    What is or isn't happening? Are you getting an alarm?

    On you i/o menu you must set the correct port/device numbers for
    input and output operations.

    You can get an M500 instuction manual at www. meau. com follow
    download links and grab the "INSTRUCTION MANUAL" this will detail
    how to carry out I/o operations to different device.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Mitsubishi MR-J2S-xxA wiring issue
    By LCY in forum Servo Motors / Drives
    Replies: 0
    Last Post: 08-08-2011, 04:55 AM
  2. FANUC OM-D COMMUNICATION ISSUE
    By J.R. SWIGER in forum Fanuc
    Replies: 1
    Last Post: 06-04-2010, 05:59 AM
  3. Mitsubishi TC8B , chuck open and close issue !
    By Centerline MFG. in forum CNC Machining Centers
    Replies: 0
    Last Post: 09-04-2009, 12:29 AM
  4. Communication issue with a EZ Track DX with Computer
    By biker_eh in forum Bridgeport / Hardinge Mills
    Replies: 4
    Last Post: 10-26-2008, 01:43 PM
  5. Help with selector switch wiring issue (***actually a motor issue***)
    By BEDFORD in forum Charter Oak Automation Support Forum
    Replies: 7
    Last Post: 04-07-2006, 09:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules