The article at the top of this section does not answer this at all openly.
Does full step provide more torque than 1/8 step?
The article at the top of this section does not answer this at all openly.
Does full step provide more torque than 1/8 step?
Yes, you lose torque.
See Hoss's page here for details:
http://www.hossmachine.info/Shop_Info.html
Cheers,
BW
Try G-Wizard Machinist's Calculator for free:
http://www.cnccookbook.com/CCGWizard.html
Thanks Bob!
Great help from this site.
The page a little misleading. The table shows how much torque is required to push the motor 1 microstep out of position. The motor still develops its rated when it is one full step out of position. This is the same point a full stepped motor develops its rated torque.
Mariss