Hello!
I have 3 Parker GV6 controller, but its bad controller for CNC (not have step-dir input), if you have Parker GV controller, i need photo up PCB (may be i can downgrade GV6 to GV).
Thanks and sorry for my bed english.
Hello!
I have 3 Parker GV6 controller, but its bad controller for CNC (not have step-dir input), if you have Parker GV controller, i need photo up PCB (may be i can downgrade GV6 to GV).
Thanks and sorry for my bed english.
up theme please any body help
I have the same problem you need gv drives not gv6, you can ask by parker if it's possible to downgrade them.
I don't think so, problem is the software(bios of the drive)
let me know how you do this