[robert0707]

Hi
I just bought a wire edm from agie. put it all back together and when starting erosion always get alarm "erosion start with wire in short circuit"
I took apart both lower and upper arm assembly, clean it and put back together. It didnt help! Sometimes I also get alarms regarding generator 1 and 8, but I think generators are ok as I swapped both 1 and 8 with other ones and still got the alarms sometimes.
any clues where to search or what to check??
Thanks

[Ario_b]

Are you sure you have assembled generator output (FS+ and FS-) cables and gap voltage sensor cables (UFS+ and UFS-) in correct polarity?
Sometimes disconnecting of gap voltage sensor cables cause short circuit error on display.

[sk8er938]

I'm selling an Agiecut 250 HSS, When i sell it im going to provide a video of disassembling to help the buy in reassembling. When i do i can send you the video to see if it helps.
If anybody wants to buy the machine is in Canada and i'm selling it for $15,000 CAN.