G'day.
I have just received and set up a Chinese 6040 CNC machine. All is up and running but I may have (or may not have) unintentionally altered a setting in the Spindle controller via the front panel of the control box.
![](http://www.cnczone.com/forums/attachment.php?attachmentid=335914&stc=1)
I'm hoping that someone might be able to note down all of the program settings for me (ie D002 = ???) so that I can check to make sure that I haven't altered anything. It's the 1500w VFD and has PRT-E1500W written just above the LED display.
When I first assembled the machine I am sure that I had the spindle spinning up just by using the knob on the front of the control box. I wasn't able to run any of the other motors until I set up my computer and the Mach3 configuration. Now, I have it all set up, all the axis motors work, but I no longer can get the spindle to run even from the knob on the control box. I'm wondering if I have accidentally changed a program setting in the VFD.