Hi, I have a full line of CNC pats in the Toronto area , if your looking for c5 ballscrews and linear rails .motors .driver, spindles almost all parts you would need
Thanks for your time
Hi, I have a full line of CNC pats in the Toronto area , if your looking for c5 ballscrews and linear rails .motors .driver, spindles almost all parts you would need
Thanks for your time
website? specs? prices? details? !!!!
No site as of yet till we have all products in , but once we have all here and have outlet open for pick up we will have the site with all info up and running, If your are looking for products i could till you when they will arrive and the price, we will have almost every part and more Thanks
Have all linear rails and bearing in right now from 16mm to 25mm and c5 ballscrews by the 21 aug
What length of ballscrews do you have access to? Diameter?
I'm in the market for a ~12ft long unit in a 1.5" od... fairly tight on the lead
Is that something you might have access to?
Thnx
J
JerryFlyGuy
The more I know... the more I realize I don't
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
largest i have right now is 25mm 2800mm Thanks
Is your website up and running? Link...? Tnxs
No, but should be up by end of sept
its past aug 21.
im curious what you have for c5 ball screws.
my mill project needs 16mm screws, with 175/320/275mm travels with machined ends for thk "BK" style bearing blocks.
what kind of price would that be?
could you conatct me at [email protected]
1605-4 PER 100MM $6.50
2005-4 PER 100MM $7.50
2505-4 PER 100MM $9.75
high precision rolled ± 25µm/300mm
MACHINED BOTH ENDS FOR BK.FK AND FK.FF IS $20 PLUS
Have machined 200mm.254mm,300mm,600mm,900mm and 1200mm in TRAVEL (PLUS 81MM FOR MACHINING) on the 1605
Have machined 200mm.254mm,300mm,600mm,900mm and 1200mm in TRAVEL (PLUS 61MM FOR MACHINING) on the 2005
1605 BALLNUT $59
2005 BALLNUT $65
2505 BALLNUT $70
i will list more later today
looking for gecko drives ,high torque stepper motors,lathe indexer parts someone to build and add the fourth axis
You can email me at [email protected]
Don't have grecko but have 4.2a and 8.2a driver with breakout board
16mm rails is $1.75 per 100mm
sma 16mm block $6.90
sma-s 16mm block $8.62
sma-L 16mm block $14.50
20mm rail $2,25 per 100mm
sma 20mm block $8
sma-s 20mm block $10.25
sma-L block $16
25mm rail $3.00 per 100mm
sma-25mm block $14
sma-L block $29
TBR 16MM $4.30 per 100mm
BLOCKS $10
SBR 16MM $4 PER 100MM
BLOCKS $ 8
TBR 20MM PER 100MM $ 5
BLOCKS $13
SBR 20MM PER 100MM $4.65
BLOCKS $9
TBR 25mm PER 100MM $6.30
BLOCKS $19
all prices are in Canadian dollar
got any pictures of the screws?
so these are c5 rolled screws with no backlash? havent seen many rolled screws at that precision. prices seem good though.
now i just need this machine cast
you mentioned some other stuff in your first post. spindles, motors. what type do you have of these?
for linear rails, i assume its just round rails correct?
I will post pictures of ballscrews tomorrow , they are high precision rolled and not from china,also have 2 year warranty 0.018 guarantee ,lots of companys produce 0.018 but people dont want to spend the extra money and just get 0.023 or higher , i will give prices on spindles,inverters and motors and other but i only but the prices on products we have here as of now . More products coming every week, plus have a lot of parts made in Canada ,as in motor mounts ,cnc frames ,coupling ,z axis ,end support bearing housings , y axis,and x axiz frame's and made in north american aluminum . 270oz motor will be $29 and 425oz $ 35 CDN but i will post the prices of products that will be here in sept, the prices there are for round rails and TBR and SBR supported rails, We are trying to make as much of the parts in North America as we can , with out prices being unreal.because if a part is $7 made in can or usa people would buy it from other country if it was $5
cool. you need to get a website going man
heres an example lits of parts i need for my open source mill - small/medium/large
ball screws, C5 or better, 5mm lead, 16mm/20mm/25mm diametre.
BK bearing blocks to match screws.
linear profile rails, narrow block, ball or roller, 20mm/25mm/30mm.
brushless spindle motor with inverters, 6000-12000rpm, 1-3KW.
high speed spindle motors with inverters. ER chuck or iso ATC. 24000rpm+.
brushless ac servo motors with drives, nema23/1NM/3000rpm, nema34/2nm/3000rpm with step direction input drives.
trying to get inexpensive but still high quality components to keep these machines at good prices.
We have c3 ground ballscrews but don't have final price on them till they arrive here ,about around 20% more in price, We have HSD spindles and water cooled 1,5kw $300 and 2,2kw for $400 and 3kw $500 plus the exchange rate at the time .inverter are1.5,2,2kw $160 and 3.7$260 plus exchange rate usd, but there a month away becuse of shipping