Hi cnc2,
If you look through the old thread I have posted a picture of my first board. The link is here: /post 593/
http://www.cnczone.com/forums/showth...=14217&page=50
The other 4 boards are somehow different since I have used rectangular wire, something like 4x1mm if I remember correctly, but I do not have pictures of them. It is a problem when trying to solder this big thing on the board and if you get it too hot for too long time the board is going to bend which is not that nice.
It will be interesting to show my boards since they are made like noone has done here on the thread - the FET's are on the other side of the board. It's a problem I don't have my camera here now, maybe will do it with the phone, quality will be poor, but enough to see.
Todor