Hello !
How can i measure both offsets for this tool (picture below) ? The tool number is 14 and when i measure it i type TL014014 but the other side of the tool is 014024 and i always have problems when working with both offsets...
Okuma multus b200-w with osp p200l
Results 1 to 2 of 2
Threaded View
-
05-09-2017, 08:57 AM #1
Member
- Join Date
- Feb 2016
- Posts
- 30
How to measure 45 degree cutting off tool
Reply With QuoteSimilar Threads
-
Tool Measure nk105 Weihong
By electracks in forum Chinese MachinesReplies: 3Last Post: 08-06-2019, 09:34 PM -
ACP (aluminum plastic composite panel)samples show after 90 degree tool and cutting
By AllenOmnicnc in forum VideosReplies: 0Last Post: 02-28-2017, 02:59 AM -
tool change and measure tool lenght, macro?
By Charon in forum Mach Wizards, Macros, & AddonsReplies: 3Last Post: 03-20-2012, 06:56 PM -
Can't find this tool to measure the I.D. of tubes anywhere..
By squale in forum MetalWork DiscussionReplies: 10Last Post: 02-18-2010, 03:05 AM -
Offset, measure the first tool and second tool
By domax in forum Daewoo/DoosanReplies: 14Last Post: 12-30-2009, 05:20 AM
Tags for this Thread
Posting Permissions
