Hi guys
I used the Rapid Turn about 2 months ago and left my 3 jaw chuck in there. I cannot seem to get it out even after removing the draw tube. Any suggestions? I don't want to damage any so I thought I'd ask here first.
Thanks!
Matt
Thread: 3 jaw chuck stuck in Rapid Turn
Results 1 to 5 of 5
Threaded View
-
11-27-2016, 01:04 PM #1
Registered
- Join Date
- Feb 2007
- Posts
- 27
3 jaw chuck stuck in Rapid Turn
Reply With QuoteSimilar Threads
-
stuck chuck
By TurboCare in forum FanucReplies: 2Last Post: 08-09-2016, 02:57 PM -
Daewoo Puma 240 rapid override stuck at F0 or 50%
By DHartsell in forum Daewoo/DoosanReplies: 5Last Post: 07-07-2013, 10:27 PM -
Jaw stuck on chuck
By AVRnj in forum Uncategorised MetalWorking MachinesReplies: 7Last Post: 06-26-2013, 11:42 AM -
Daewoo Puma 240 rapid override stuck at F0 or 50%
By DHartsell in forum Mori Seiki lathesReplies: 1Last Post: 06-21-2013, 03:29 PM -
SX3 -- my chuck is stuck, what to do?
By krazatchu in forum Syil ProductsReplies: 14Last Post: 11-25-2007, 02:57 AM
Tags for this Thread
Posting Permissions
