[g-codeguy]

#1=0
WHILE[#1LT48]DO1
#[101+#1]=.001
#1=#1+1
END1

Stevo

You were too quick for me. Just got home a few minutes ago. Finally something I could answer, but you beat me to it!

[Ashish B]

Hi

Thanks Stevo for that program.

Well can anyone address & let me know the COMMUNICATION Setup for RE232C Link?


Thanks for you TIME, PATIENCE & SUPPORT

Ash

[stevo1]

You were too quick for me. Just got home a few minutes ago. Finally something I could answer, but you beat me to it!

LOL…..Sorry Dale I didn’t mean to steal your thunder . I have been so busy the only things I have had time to answer are the quick easy ones.

Ash…I have never set up the DNC on a Mitsubishi control before. I have attached a note of the settings I have from a quick guide. Also here are 2 links I found for the M50 control and the 300-500 control. I did not see anything on the M64. The wiring should be the same so I have also attached the pinout that I use.

Mitsubishi M50
http://www.aggsoft.com/cnc-dnc/mitsubishi-m50.htm

Mitsubishi 300-500
http://www.aggsoft.com/cnc-dnc/mitsubishi-300-500.htm

Stevo

[Ashish B]

Hi Stevo,

Thanks a lot for that VALUEABLE ATTACHMENTS

I need to know in context of RE232C setup. I mean like does it required a software to recieve the data on PC or it will work on the HYPERTERMINAL program (which is a standard feature in Windows PC )?


Also Stevo, can u suggest me some of the Software Names which i can google down & download & work with it.


Ash

Thanks for your time, support & PATIENCE.