Hello!
Im operating Edgecam 2010R1, and im having problem with the THREADING OPERATION (CYCLE) for turning. I go to the the OPERATIONS menu, select THREADING and the prompt bar requires me to DIGITISE THE LINE TO THREAD(NEAR START POINT).
This is where my problem starts. I dont know which line to digitise. I take a chance and enlight or enlight the surface where the thread should take place, and im presented a thread operation dialog. I fill the dialog box and when i press Ok at the end, i got an error message saying; DIGITISED SEGMENT IS NOT A VALID DRIVE LINE, and the prompt bar asks me to DIGITISE DRIVE LINE.
So, i would like to be helped to understand, WHAT IS THE DRIVE LINE, and how to digitise it.
Thanks in advance.