Recently Picked up one of these mills. I've been working with another guy that got one also and we are having quite a few problems. We finally got ahold of the software for the machine through the guy we bought the machining centers from. The software I have is called Mill Level 4 through lab volt. When I connect the machine to the desktop computer I have I cannot get them to work with each other. The machine powers up and I can manually run the spindle and all axises, but with the cable hooked up I cant seem to the the software to work with the machine. I'm starting to think there's some sort of product key I'm missing. If anyone has an information on the machine I'd greatly appreciate it. Thanks.