Hello
I have a problem, i put the my backup of PLC program and now i can't look to the ladder, it have only the lines of outside. What i need to do to solve that?
Best regards
Vide
Hello
I have a problem, i put the my backup of PLC program and now i can't look to the ladder, it have only the lines of outside. What i need to do to solve that?
Best regards
Vide
Sounds like nothing went in?
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Hello
The plc progra is there becouse the machine work, but i can't change the software limit's of Z, i can change with the plc in stop, when i put in run, the p2013 of z change to -410 alown.
I wont look to ladder to saw were is it.
Best regards
Vide
What caused you to reload the PLC from backup?
Did you loose SRAM and settings?
Axis stroke limits generally are set in the parameters, both user and Machine
Under user parameters look for the ones labeled "OT-CHECK-N" and
OT-CHECK-P under the User params - AXIS
Under the machine parameters (these are set by the OEM)
there is OT- and OT+ under the axis group