[18111]

Hello there,
I'm looking for cheap laser for engraving mostly on custom made pens.
Do anyone know or use this laser or any other suggestions?
It seems better than most lasers on eBay.
Wholesale Cutting Machine - Buy LY3020 110v / 220v 50w LASER ENGRAVING MACHINE CO2 Laser Engraver Laser Cutting Machine Laser Machine USB Port Hot!, $873.0 | DHgate
Thanks!
Yoshi

[Exsecratio]

Yosh,

Don't bother

They are ****e!

It's a K40 / K40 Clone

cheers

Dave

[frank wang]

Hello there,
I'm looking for cheap laser for engraving mostly on custom made pens.
Do anyone know or use this laser or any other suggestions?
It seems better than most lasers on eBay.
Wholesale Cutting Machine - Buy LY3020 110v / 220v 50w LASER ENGRAVING MACHINE CO2 Laser Engraver Laser Cutting Machine Laser Machine USB Port Hot!, $873.0 | DHgate
Thanks!
Yoshi

Hi ,

For choosing a machine , you need think about the working material ,
like thickness ,size . and then you can choose the watt ,size of the machine

In China ,700mm length small tube , it is very hard to get 40W , normally is 36W -38W

The machine you said ,is a very simple machine , the control board ,also with the
driver function for the stepper motor , not a good one , also the power .

i have modified this simple one machine , with DSP control system , independent drivers for the motor .
Up and down working table , honey working table, laser head with air assist ,and red laser dot .

For information , please be free to contact me anytime, i will try my best to solve your questions .

Regards

Frank

[frank wang]

[18111]

Hi Frank,
Your modified machine seems interesting.
I need to do mostly logo and name engraving on plastic and wooden pens.
So I think 40 - 50w is good enough.
How much will it cost include everything such as shipping, duty tax, etc?
Warranty?
How long dose it take get here in USA?
Do you have web site that I can see the products and specs?
Thanks
Yoshi

[frank wang]

Hi Frank,
Your modified machine seems interesting.
I need to do mostly logo and name engraving on plastic and wooden pens.
So I think 40 - 50w is good enough.
How much will it cost include everything such as shipping, duty tax, etc?
Warranty?
How long dose it take get here in USA?
Do you have web site that I can see the products and specs?
Thanks
Yoshi

Hi ,

please give me a email ([email protected] , or add my Skpye: cenranlaser

to give me your address for calculate the shipping charge .

Sometimes , within 5 working days ,you can get the machine .

Regards

Frank

[18111]

So, I ordered Frank Wang's modified k40 with DSP control system.
His machine's spec is similar to the one I mentioned here except his machine has DSP and honeycomb table.
Total cost include shipping is $1460 (machine $1080, shipping $385). It's $587 higher than the one I mentioned here but with DSP and honeycomb table, I think it's justifiable and Frank seems helpful guy here. I hope my decision was right one. This is my first laser so I'm excited but also anxious. I will post my experience when I receive the machine hopefully in couple of weeks.