Brand new CNC router engraving machine ( made in USA)
Machine size 18x28 inch
X travel 12"
Y travel 22"
Z travel 4"
Resolution: 0.002"
Stepper motor is NEMA 23 282 OZ/IN
Stepper Driver: KL-4030
Power supply: 36VDC, 9.7A ( 110VAC/220VAC)
16 mm ball screw on all axis
X and Y have 20 mm shaft
Z have 16 mm shaft
All axis have limit switch
Tested with Mach3 software http://www.automationtechnologiesinc...ith-controller