Not sure where to post this but i am looking for 3 planetary gear boxes 10:1 parallel or offset shaft.. anyone have any good sources?
Thanks
Not sure where to post this but i am looking for 3 planetary gear boxes 10:1 parallel or offset shaft.. anyone have any good sources?
Thanks
SDP/SI has them.. https://sdp-si.com/eStore/
Gearheads -> Planetary
They come in all the standard NEMA sizes but they're $$$$$$$.
If you have the time, I get mine off ebay, Bayside or Alpha Gear.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Typically planetary gearboxes do not have offset shafts. You could save a ton of money if you could use a spur gear. But if you need Planetary in addition to the names above try Mechtrol, CGI, Neugart. They will be marginally lower priced than the ones above
And Thompson.
Also, I'm not sure you can get them down in the 10:1 range but Harmonic drives might be another route? See them sometimes on Ebay.
Jerry
JerryFlyGuy
The more I know... the more I realize I don't
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Here's another:
http://www.surpluscenter.com/sort.as...s&keyword=PGRI