Hello Guys!!
i asking some advice with the LT25-M
The problem is, when i start the machine i get
a alarm related to the Cicle to the Changeover, of the Low speed
Relee (not is actuated).
i double check the driver side off this relee and discover is working fine
... well i suspect over the Relee atached to the PCB in the VAC board
and discover this and the driver transistor is fine. (so i suspect to the logic
in the vac board)

Anybody have a idea how i doing further testing to pinpoint the faulty circuit?
any help is wellcome.

thanks in advance


juanjo