Hi all,
First I want to apoligize for starting a new thread because I have no idea what keywords to use for searching this forum.
The problem is that unfortunatly our laser cutter/engraving machine stopped cutting in a proces.
We checked the tube for dark/burned places and or cracks but all seems to be fine!
We contacted the manufacturer and we both did several tests with no results.
At last I decided to replace the tube.
Did a manual laser beam test by pressing the test button on the control panel.
Viola!, ...it works!!
Now back to the PC to run a cutting proces. What happens is that the head is moving but without cutting!
So the machine is now only cutting with the toggle switch in MANUAL mode!
AUTO mode to control the power by software isn't cutting....
We also had another PC running the software with no results.
Anyone any idea about this problem?
Would be great,
Moos.