Quote Originally Posted by shaun348 View Post
I'm hoping this thread is still viewed and someone can help.
I have a HY inverter Model 02D223B and a 2.2KW 220v 400hz spindle

The spindle and VFD were running ok with a XHC MKX-V Mach3 Breakout Board and Mach3 but had issues with the stepper motors so i have reconfigured the CNC with a CSMIO IP-S and SIM CNC software and have now eliminated that issue but after re wiring the VFD to the new controller i'm now having issues with it and the VFD. Unfortunately en-labs are not the best for communication or help with set up issues

The VFD works fine via the operator control panel and speed can be controlled but when trying to control it via the CSMIO IP-S i get nothing
[...]
.
Hi Shaun,

I created another scheme for you, that is, I expanded the one I sent you previously. I hope it helps this time. Also, pay attention to the parameter numbers that I indicate because they are crucial.



https://en.cs-lab.eu/wp-content/uplo...vfd-simcnc.jpg

Regards,
WT
CS-Lab Team