586,648 active members*
2,690 visitors online*
Register for free
Login

Thread: aluminum shape cut 0.05" thick

Results 1 to 6 of 6
  1. 09-18-2012, 02:50 AM #1
    threeninethree
    threeninethree is offline Registered
    Join Date
    Sep 2006
    Posts
    10

    aluminum shape cut 0.05" thick

    I need this shape and another one slightly smaller cut out of 6061-t6 aluminum.
    .05" thick. Two of each.

    I will supply a dfx file in the units of your choice.
    ---The dimensions are shown to the 4th decimal place but the closest 0.000" is fine-----

    Reply With Quote Reply With Quote
  2. 09-18-2012, 03:49 AM #2
    UWP_Wes
    UWP_Wes is offline Registered
    Join Date
    Apr 2006
    Posts
    76
    All you need is a printer, some tape and a pair of snips.
    Reply With Quote Reply With Quote
  3. 09-19-2012, 01:59 AM #3
    threeninethree
    threeninethree is offline Registered
    Join Date
    Sep 2006
    Posts
    10
    The parts need to be made by machine. The parts are incorporated into the construction of skis with tight tolerances.
    Reply With Quote Reply With Quote
  4. 09-21-2012, 09:08 PM #4
    manualmachinist
    manualmachinist is offline Registered
    Join Date
    Sep 2012
    Posts
    24
    what is this used for? what tolerance do you require?
    Reply With Quote Reply With Quote
  5. 09-21-2012, 11:08 PM #5
    threeninethree
    threeninethree is offline Registered
    Join Date
    Sep 2006
    Posts
    10
    They are for the base of skis, at the tips
    Here is a picture of what the part will look like.
    The tolerance is .005" I guess.
    Reply With Quote Reply With Quote
  6. 10-06-2012, 07:13 PM #6
    threeninethree
    threeninethree is offline Registered
    Join Date
    Sep 2006
    Posts
    10
    Thanks to all who replied and Pm'd but the part has been put on hold.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. My 1/2" Thick Aluminum Build
    By kolias in forum Open Source CNC Machine Designs
    Replies: 36
    Last Post: 12-10-2012, 06:58 AM
  2. Mill 5 1/2" Aluminum circle 1" thick with center post down to 1/8" Thick
    By WRichards in forum North America RFQ's
    Replies: 5
    Last Post: 09-12-2012, 03:09 PM
  3. RFQ - Aluminum 0.090" thick fins, Water or Laser cut
    By jhuebbe in forum RFQ (Request for Quote)
    Replies: 0
    Last Post: 05-14-2011, 07:51 PM
  4. Looking for thin aluminum, 0.020" thick, sheet
    By laka in forum MetalWork Discussion
    Replies: 0
    Last Post: 06-26-2009, 06:32 PM
  5. Best Mill for 1" thick Aluminum?
    By gtslabs in forum Uncategorised MetalWorking Machines
    Replies: 13
    Last Post: 01-01-2004, 04:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules