I have a mori seiki SL_15m with fanuc MF-T6 control ,I don't have any operator manual .
Does anyone have the M codes list for this?
I have a mori seiki SL_15m with fanuc MF-T6 control ,I don't have any operator manual .
Does anyone have the M codes list for this?
it's a Fanuc 16T control. You can use any Fanuc 16/18/21 manual for basic operation. I have all the Mori info, but first......
do you have live tools/c axis? tailstock? steady? etc etc? what is the spec of your machine. or post a few pics......
I want to know that, which M codes is for tailstock ?
My machine has live tools and C axes and tailstock.
is it a tow-along type (i.e. programmable positioning of the body), or manually clamped with a spanner?
tailstock is manually,we can move it only forward or reverse with pedal.
ok well all you can do is program quill in/out, that's M26/M25
I checked M25/M26 but I didn't see any reaction. I think one of the keep relay (K pmc parameter) is not active.
are you sure it's programmable? it may only be a manual tailstock activated with pedal and push buttons on the panel.....
there is only one keep relay parameter related to the tailstock.
K7 bit 0 is 1 if your tailstock is programmable and 0 is it's manual only.