Hello,
You found the solution to your problem of hard disk with AGIE 120.
I have the same problem.
I changed the hard drive, but the problem persists.
If you find information, I can help.
Thanks.
Hello,
You found the solution to your problem of hard disk with AGIE 120.
I have the same problem.
I changed the hard drive, but the problem persists.
If you find information, I can help.
Thanks.
hello
no solution at this time
i start agie with an 260 mo hdd
but i'm blocking at this stage:
checking security device
i don't no if it is software protection or other problem
i go to make test with 120 Mo hdd
original hdd on agie is 120 mo hard drive
with 4 partitions
c: 6 Mo
d: 40 Mo
e: 40 Mo
F: 28 Mo
have you a ghost image or other of your hdd ?? Sif369
to be continued
some help are more appreciable
bye
Hello!
I don't have a ghost image or other disk floppy.
I need to resolver the problem.
Do you have the 4 partitions?
Regards!
hello Sif369
please read your private message
thank
regards
Hi Steph !
Huge thanks to you.
My old Agie is running again.
Greetings
Hello,
i have problem with Agie 270HSS because my hd is brocken. I found new image from hss250 and make a clone but dont work because i have securiti problem. On my old hd folder with passwod is clear.
What i can do to jumped pasword.
or somebody have any idea to nsolve problem.
Best regards,
Vlade
Hi!
Attached are the JPG of my Agie bios.
Hdd´s were automaticaly detected...
Looking to the yks manual i can see at least 2 errors. Boot sequence and "Land Zone".
Can you find another?
regards
tintin2005
Hi, I'm looking some missing files for my AGIECUT 220.
It seems the hard drive is not dead yet but the folder CU91 is missing.
Can someone provide some files or help ?
regards !
hello puggy
folder CU91 from working image at this link
CNCzone.com-The Largest Machinist Community on the net! Over 300,000 members and growing.
good luck
don(t forget
make scandisk on your agie hard drive
and copy CU91 folder from the archive
bye
Hello sir. I have problem with my agie 220 machine hard drive. My final configuration floppy is not running properly may be cause of hard drive software problem. Please send me hard drive img so that I could copy it on my hard.
Regards,
Kamran
hello
sorry for later reponse
please explaind your problem
hard disk is ok ??
220 model is a same with 120 D ??
when you connect your hard drive to your pc have you 4 partitions ??
Many thanks to steph06. He kindly agreed to help me.
But at first I liked to recover my Agie with my own efforts.
1.I have found 2 variants of CU91 folder.
2.I replaced the damaged HDD with "new" 2.1GB one and formated it onto 4 partitions as it is required.
3.I installed Novell DRMUDOS instead of the OS which had been installed initially . It works normally, the Norton Commander and other DOS apps work well under DRMUDOS
4.I changed autoexec.bat file in order to run CU91\mod\ agiecut.exe. Obviously this is the main agie routine which runs sequentially all others.
But agiecut.exe attemps to find somewhat like "language files" and can not find them anywhere.
So I've stuck at point 4.
Mr Steph,
I´m having the same problem with my agiecut 120. The system tries to start and lands in the c:\cu91\mod folder. Would you please provide me the link to download the HDD image?
Thank you in advance.