[deonsmt]

The goal was to build a CNC router from 8020 aluminum extrusions. Ultimately the picture below shows where I ended up....



This router was built 2 years ago. I've started transcribing my notes into a blog which is part Instructable, part ramblings of someone who spent too much time in the garage.

DLS Projects: Part 1 - CNC Custom Router Intro


-

[deonsmt]

The base consists of 4 x 1030 8020 extrusions arranged to form a fully supported base. This design will have 2 lead screws on the X axis, one on either side. A slightly more expensive way to do this but it helps overall rigidity.

I've added more detail to linear motion slection and the base assembly to the blog

DLS Projects: Part 4 - Linear Motion

DLS Projects: Part 5 - Router Base Assembly

[deonsmt]

Added detailed dimensional drawings for the bearing blocks, motor mounts, delrin nuts to the blog. The drawings don't meet any mechanical drawing standards but have enough detail for you to make your own parts.

DLS Projects: Part 6 - X Axis

DLS Projects: Part 6 - X Axis

The blog provides additional technical detail of the X-Axis parts and assembly.





Let me know what you think.

[mmcp42]

always fascinating reading someone else's build log

(you might want to shuffle the order of the links on the right hand side top of your blog
seems to go 1, 2, 4, 3, 5, 6)

[deonsmt]

Here's a practical application of the router. A switch mount for a custom pro street chopper I'm building

Midnight Customs: Part 8 - Regulator and CNC Switch Mount

-

[cheetahcnc]

Nice build :cheers:

[CM2013]

Hi, do you have detailed info on your z axis?

[deonsmt]

I threw some pictures onto DLS Projects: Part 7 - Z Axis