Hello
Does anybody have a machine parameter list for the machine Maho MH900C with cnc432 controller?
At the moment I need the complete parameter list and I'd like to buy a service/parameter manual for this controller.
Regards,
Mikko
Hello
Does anybody have a machine parameter list for the machine Maho MH900C with cnc432 controller?
At the moment I need the complete parameter list and I'd like to buy a service/parameter manual for this controller.
Regards,
Mikko
Hello Mikko
sorry for the late answer.
I’ve got them only in German :-(
Best regards
Mahoist
[attachment=6204:MC_9_432.pdf]
<b>Gruß / Regards</b><br /><i><b>CNCFanatiker</b></i><br />AdminCrew<br /><br />Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.<br />If we always this act what we are able to do, then we always remain what we are.
someone has the machine parameters for machining center MAHOMAT cnc 432?
thanks.
Hi;
I have a boehringer vdf 250 c with a cnc 32bt controller . During diagnostics one of my IO cards is detected and five no fault , but it gives all I and O are on 0 even if they are on 1 .
I switched cards , the same probleme with another card at same position.
Hi. Is it possible to set a soft start and a spindle stop somewhere in the parameters? (Continuous). I have a MAHO 600 with Philips 432. It has an Indramat A31 frequency converter. When it runs at about 1000 rpm. , and turn off the spindle, it stops immediately when it hits. Thanks for help.