Hello
It’s is possible to set up the programming station like it is on a machine?
Hello dodo3
What’s included in your backup? As cgTNC already wrote, you need more than just a back up of the system files. An update of the complete PLC would be optimal
However an interesting topic, what about we create a little tutorial to adjust the programming station.
Let’s see where we reach out limits
Let’s make a check list of the points that need to be considered when adjusting the work station.
We will need:
1. Adjust depending on the software version (identical software version on PC and on machine)
2. original PLC update of the source- machine
3. please add
What needs to be modified:
1. Kinematics
2. M-commands ( possible manufacture specific)
3. MP adjustments and user parameters
4. user macros
5. please add
<b>Gruß / Regards</b><br /><i><b>CNCFanatiker</b></i><br />AdminCrew<br /><br />Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.<br />If we always this act what we are able to do, then we always remain what we are.