509,534 active members
5,040 visitors online
Register for free
Login
IndustryArena Forum > CNC Electronics > Dmm Technology > Syil 5 linear conversion.
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Apr 2004
    Posts
    52

    Syil 5 linear conversion.

    I have just received the DMM 4 drives and 400 watt motors I am going to use on the Syil 5 I purchased several years ago while in Mongolia. I am back in the US and want to convert it to AC servos. It is a small mill witha 12 X 6 X 11 " travel. It has Hiwin slides and ball screws on all axis. I have looked for some time at different options and played with Granite drives for a time but settled on new servos and drives.

    Shipping was prompt and I have been able to play with one of the drives and motors. The motors are suprisingly small but run very quite. For testing I am using 120v but will use 220v in the machine. The drives are capable of running larger motors but I think the 400w is enough.

    I'm still deciding on the spindlr drive. The original is the Samtung 1100 watt BLDC. The new 5's have aVFD. I did get a new Marathon Max Inverter 3phase motor that should arrive next week but I think it might be to large. Any way I will post as I get time.

    Larry

  2. #2
    Member
    Join Date
    Jan 2005
    Posts
    10522

    Re: Syil 5 linear conversion.

    2ndSteel

    The Dmm is a good choice for your drive system, you may need a 750W motor for the Z axes, depending on how balanced it is
    Mactec54

  3. #3
    Registered
    Join Date
    Apr 2004
    Posts
    52

    Re: Syil 5 linear conversion.

    That is one reason I went with the Dyn4 drive is so I can move up to a bigger z motor. I wanted to see what it does. It is balanced with a spring shock and is on linear guides.

Similar Threads

  1. Syil x5 linear guide type?Please help.
    By shedbob in forum Syil Products
    Replies: 1
    Last Post: 08-11-2011, 01:35 PM
  2. Syil X3 Conversion kit
    By f757lkk in forum Syil Products
    Replies: 9
    Last Post: 09-29-2009, 04:20 AM
  3. Linear Encoder With Syil x4
    By obrif in forum Syil Products
    Replies: 16
    Last Post: 09-09-2009, 11:30 PM
  4. Syil X2 CNC Conversion Nightmare
    By IMK1230 in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 10-04-2008, 10:46 PM
  5. Travel limitation on Syil X3 conversion
    By Greolt in forum Benchtop Machines
    Replies: 23
    Last Post: 08-13-2006, 12:26 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •