thanks.. i actually worked thru the night and the next morning a guy on facebook group offered to help me by sharing pics of his machine and voltages.. we found the lead wire going to the mainboard bad.. i pulled the mainboard and wire to power supply to test continuity and found the green wire showed no continuity.. upon further inspection after de-pinning the wire from the connector.. i found they had cut the cable when they crimped the connector.. i cut the wire off and cleaned it up.. soldered on a new wire (red) and then proceeded to check voltages again.. this time everything looked good.. installed the mainboard back and sent a file from corel and boom it worked..

i will probably rewire the whole thing at a later date as i am going to be doing a few more mods but atleast it is working

thanks for the offer to help.. i found numerous people who had the same problem but never got an answer.. so maybe if they search and see this.. they will have options..