Hi
I know it's not standard, but will it be ok if : I used a 381oz 3.5a per phase stepper plug to a controller driver of 5.5a. Can I plug in parallel a smaller stepper like 280oz at 2amp ?
With those 2 motors it will took 5.5a, so being equal of the stepper driver power.
perhaps it might be better to used a bigger driver, like giving a 6amp.. But the 2 stepper will be used in a belt application at 3:1 ratio, like a Z axis, so i don't expect to top the load rating of the stepper and driver.
Thanks for input.