Hi
I am facing a tool change problem on Mazak impulse 30 machine with IMAC Controller.
I noticed that macro program O9999 is missing. I don't have a backup for this machine.
Can anybody help me to resolve this problem?
Regards
Niteen Natu
Hi
I am facing a tool change problem on Mazak impulse 30 machine with IMAC Controller.
I noticed that macro program O9999 is missing. I don't have a backup for this machine.
Can anybody help me to resolve this problem?
Regards
Niteen Natu
Hi, Did You resolve the problem?
I am in the same situation.