[rick027]

So mactec, you think I should try hooking it up jUst to the SSR and go from there

[mactec54]

So mactec, you think I should try hooking it up jUst to the SSR and go from there

If the Breakout Board has 0-5v when you use M3 and M5 then yes you can direct connect to the Breakout Board that's all the relay needs to turn it on and off

[rick027]

Thanks I'll try that ,and I'll let you know how I made out

[rick027]

If the Breakout Board has 0-5v when you use M3 and M5 then yes you can direct connect to the Breakout Board that's all the relay needs to turn it on and off

I got it to work with just the SSR ,relay board still doesn't wanna work so I'm gonna go with the SSR only, I tried contacting CNC4pc a few times through email ,about the board, maybe I was missing some kind of setting in mach3. They never got back to me....so I guess I have to go without..
Thanks guys for all your help ....Mactec thanks again