Hello! I faced problem I can not find on Internet.

Fadal VMC40 Model 904-1
Seller told it is build on 1986. Software says 1993.

Worked fine before move.
Now wont ask for belt position on start.
Asks to jog axes to home position, but Jog screen returns back almost immediately. Jog wheel does nothing.
Responds with "Reset the emergency stop switch" to CS command.
Emergency switch is off. No breakers with popped up buttons. Motor breaker with big white "button" also is on.
I can not reset emergency switch by pressing Jog button, because it works improperly.

Connected to 220V 3 phase. Pressure connected too.

Here is the videos:
https://photos.app.goo.gl/SSX1LrvtYLtAyKNL9
https://photos.app.goo.gl/vrJeognFxEVLdsec9
https://photos.app.goo.gl/jG5dSEpL4vbR57GZ8

Did anyone see something like this?