587,482 active members*
3,213 visitors online*
Register for free
Login

Thread: Arrow 2 EKK

Results 1 to 15 of 15

Hybrid View

  1. 04-09-2021, 11:23 AM #1
    Sebalj
    Sebalj is offline
    Join Date
    Jul 2020
    Posts
    31

    Re: Arrow 2 EKK

    Hey maver1ck
    Phasing is okay spindle is running the correct way.
    It moves forward about an inch it seems like its hitting a hard stop when I tell it to do a tool change
    I had all the covers off when I clean the machine.
    Will remove again to see if anything is loose as far as cables or switches
    Cant remember for sure if i press the tool change forward nothing happends will double check today
    Reply With Quote Reply With Quote
  2. 04-09-2021, 03:42 PM #2
    coop31
    coop31 is offline Registered
    Join Date
    Oct 2011
    Posts
    205

    Re: Arrow 2 EKK

    I would also say phase issue. I had the same problem. Spindle running correct is not dependent on phase.
    Reply With Quote Reply With Quote
  3. 04-09-2021, 11:49 PM #3
    Sebalj
    Sebalj is offline
    Join Date
    Jul 2020
    Posts
    31

    Re: Arrow 2 EKK

    Yes Took the cover of the tool changer were the power is saw that the cam was going the wrong way
    Switched wires all good now. Just got a couple of things that pop up on start up looking for application third party
    and DHCP client could not be obtained Do you know what that is

    Thanks for your help
    Reply With Quote Reply With Quote
  4. 04-09-2021, 11:55 PM #4
    Sebalj
    Sebalj is offline
    Join Date
    Jul 2020
    Posts
    31

    Re: Arrow 2 EKK

    Did you ever have these come up during start up
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Cincinnati Arrow 2 500 EKK CNC VMC
    By Sebalj in forum Cincinnati CNC
    Replies: 5
    Last Post: 03-20-2021, 06:50 PM
  2. 96 Arrow 500
    By Sebalj in forum Cincinnati CNC
    Replies: 1
    Last Post: 07-23-2020, 04:48 PM
  3. Arrow 2100
    By W.M.E in forum Cincinnati CNC
    Replies: 0
    Last Post: 01-15-2013, 08:55 AM
  4. arrow 500
    By danq in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 09-01-2011, 10:45 AM
  5. Arrow
    By fidia in forum Cincinnati CNC
    Replies: 7
    Last Post: 10-07-2009, 03:29 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules