Attachment 469004
I recently bought a Rhino ST6 CNC Lathe from a Craigslist ad. The lathe is is OK shape but has a rusty cabinet. I did some research and it looks like these lathes were made in the 1990s for Schools.
Attachment 469004
I recently bought a Rhino ST6 CNC Lathe from a Craigslist ad. The lathe is is OK shape but has a rusty cabinet. I did some research and it looks like these lathes were made in the 1990s for Schools.
Joescnc 4x4 R&P Router, Minimill, Minilathe, CNC Foamcutter, laser cutter, Vectric Aspire. http://makermasters.com, http://themakersguide.com
Attachment 469008
The original electronics used a DOS based PC. I intend to change all the electronics out for newer equipment. The Centroid Acorn and some Hybrid Steppers.
Joescnc 4x4 R&P Router, Minimill, Minilathe, CNC Foamcutter, laser cutter, Vectric Aspire. http://makermasters.com, http://themakersguide.com
Attachment 469010
The Spindle motor is a Baldor 90VDC 1/2HP motor.
Anyone have any suggestions for how to remove the old paint and rust?
Joescnc 4x4 R&P Router, Minimill, Minilathe, CNC Foamcutter, laser cutter, Vectric Aspire. http://makermasters.com, http://themakersguide.com