Thanks for taking a look. It is a resistor between the AC power (not sure the voltage but probably 230) in to one leg of the bridge rectifier. There is nothing else between. I couldn't find any information about protective resistors for this particular rectifier and I'm not an electrical engineer with a oscilloscope to figure it out.Originally Posted by Mhook
Attachment 475784
Results 1 to 19 of 19
Threaded View
-
02-10-2022, 06:03 PM #3
Registered
- Join Date
- Mar 2008
- Posts
- 683
Re: Baldor Spindle Inverter Board Datasheets
Reply With QuoteSimilar Threads
-
Looking for parts to replace Baldor Smartstep 3 Controller board.
By 5T4LK3R in forum Stepper Motors / DrivesReplies: 6Last Post: 03-17-2019, 06:38 AM -
Replaced Spindle Inverter in Omniturn GT-75 with a HY-04D0-23B (Chinese) Inverter
By TAProwler in forum Hardinge LathesReplies: 0Last Post: 08-28-2014, 01:51 AM -
Problem connecting spindle inverter to brakeout board C11G
By 6bx in forum CNC Machine Related ElectronicsReplies: 21Last Post: 02-23-2011, 10:09 PM -
problem with Baldor inverter
By dango in forum FadalReplies: 3Last Post: 06-27-2008, 05:47 PM
Tags for this Thread
Posting Permissions
