i have a complete yaskawa servo amp and motor setup for 4 axis with all wiring complete accept i dont know what i need to hook it to my computer to run it with mach 3 mill someone please help me !
Thread: help help help
Results 1 to 3 of 3
-
09-02-2007, 06:37 AM #1
Registered
- Join Date
- Aug 2007
- Posts
- 6
help help help
-
09-02-2007, 03:31 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35494
Does it accept step/direction signals? If not, you'll probably need something like the Pixie.
http://www.skyko.com/products/Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
09-03-2007, 07:12 AM #3
Registered
- Join Date
- Aug 2007
- Posts
- 6
help
not sure about that i have the models . i have 1 sgdb-10adg and 3 sdga-02bs . its like a different language i work with steppers and i understand how to hook up the power to the servo amps but after that i dont know
Reply With Quote
Posting Permissions
