Hello Everyone

I am putting my woodworking shop together finally after a move to a new state. One of my ideas was to build a work table that would double as a cnc router.
I built a modified JRGO machine about 15 years ago with the skate bearings and gas pipe and It worked very good cut a bunch of RC plane kits with it. I have some sbr 20 linear rails that would allow a 4' by 6' cutting area.
Do you think this would be feasible to be done this way the gantry would be stored at 0-X and 0-Y position when not being used. I don`t need super sonic speeds for a business as I`m retired now it would be used for my own projects.

The JGRO machine I built used a hobbycnc electronics kit with nema 23 steppers 260-305 in/oz steppers I think, Would the electronics from that router be usable on a 4' by 6' router ? Its current size is 16" by 36" cutting area so basically tripling the cutting area and not expecting any more speed out of it..

Thanks for any thoughts on this James