Hello Okuma guys,
Does anyone have an idea if there's a parameter controlling the Feedrate limitation in Test Mode (the one you trigger it with the physical key on the control).
Normally when you switch from Production Mode to Test Mode there is a limitation but I want to set it lower.
Control is P200
Any suggestions?
Cheers!
Thread: Rapid Feedrate in Test Mode
Results 1 to 11 of 11
Threaded View
-
04-06-2023, 12:06 PM #1
Registered
- Join Date
- Sep 2011
- Posts
- 104
Rapid Feedrate in Test Mode
Reply With QuoteSimilar Threads
-
Miniature Rotary encoders for Feedrate, Rapid, and spindle overrides
By crasher455 in forum Dynomotion/Kflop/KanalogReplies: 8Last Post: 04-25-2021, 10:29 PM -
Max and Rapid Feedrate
By Atomic_Sheep in forum Uncategorised CAM DiscussionReplies: 2Last Post: 10-20-2016, 07:45 PM -
Setting Rapid Feed and Maximum Cutting Feedrate when Z rapid is different than X & Y
By jevs in forum BobCad-CamReplies: 38Last Post: 03-09-2015, 05:19 PM -
Feed problem in Rapid Mode
By elab.ess in forum CNC Machine Related ElectronicsReplies: 0Last Post: 05-07-2014, 08:06 AM -
Rapid Traverse Feedrate Override
By liudongxjtu in forum FanucReplies: 0Last Post: 08-05-2012, 12:50 PM
Tags for this Thread
Posting Permissions
