Hello,
My company has a haas VF4 manufactured in 2000.
It used to have an APC but that was not purchased at the auction apparently. We can reset the alarm but it returns quickly. The pallet is clamped. The switch is made but it still throws the alarm. All I can figure is that our issue is tied to the fact there used to be an APC. We’ve torn it apart down to the slides and put it back together with no change.
Results 1 to 2 of 2
-
07-20-2023, 07:15 PM #1
- Join Date
- Jul 2023
- Posts
- 3
Pallet unclamped Alarm 180 - machine used to have APC
-
10-11-2023, 03:50 PM #2
Member
- Join Date
- Oct 2023
- Posts
- 3
Re: Pallet unclamped Alarm 180 - machine used to have APC
Looking at https://www.haascnc.com/service/trou...ing-guide.html it has the following:
Setting
382 Disable Pallet Changer
Maybe try changing setting 382 to disable the pallet changer?
Reply With QuoteSimilar Threads
-
APC locked (Función APC arm up y pallet block) SH-630
By Crespo in forum Mori Seiki MillsReplies: 0Last Post: 10-21-2022, 05:25 PM -
APC pallet change
By Busmathias in forum Benchtop MachinesReplies: 0Last Post: 03-18-2020, 02:58 PM -
Mori Seiki nh5000 stops after pallet B does a 180 degree rotation - without alarm
By woox123 in forum Mori Seiki MillsReplies: 5Last Post: 07-26-2019, 09:21 AM -
300 APC Alarm : Y Axis need zrn & 306 APC Alarm: Y axis battery zero on Fanuc 16i-LA
By pacos in forum FanucReplies: 1Last Post: 01-26-2016, 05:36 AM -
Not able to use machine with APC battery alarm
By DanielBamek in forum FanucReplies: 4Last Post: 06-23-2015, 07:34 PM
Tags for this Thread
Posting Permissions
