As I mentioned, the variables will vary based on what your machine options are (i.e. spindle speed, HP, etc.) so won't post values here because they would most likely not match your machine.

Any time I have replaced a VFS5 drive, the following variables are the only ones I have had to change. If you use the values for these variables from your old drive, it should work as long as you purchased the correct replacement drive (and the original drive was working with those settings).
GEARIC
GEARIO
GEAROC
GEAROO
VXDENC
VXDENO
VXNUMC
VXNUMO
MORNT
VORNT
X41
X42
X43
X45
X47
X50
X220
ACC
DEC
P1
P2