603,940 active members*
2,463 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Syil Products > Syil X3 Motor Driver Replacement
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2018
    Posts
    16

    Syil X3 Motor Driver Replacement

    The Z axis motor driver has stopped working on my X3. The machine is twenty years and Syil no longer support these machines.

    There are plenty of modern drivers for Nema motors available online.

    Can anyone advise me on the Z axis motor size and and a suitable driver

    Thanks

    Mike

  2. #2

    Re: Syil X3 Motor Driver Replacement

    Hi
    I assume you have HB203s drivers with 40v Ac input from transformer. I replaced with Leadshine dma860e (correction) driver.
    Peter

  3. #3
    Join Date
    Mar 2018
    Posts
    16

    Re: Syil X3 Motor Driver Replacement

    Peter
    Thanks for the info, my driver is different from yours. The connection to the controller is via a ribbon cable so difficult to sort out wiring. I would not feel confident in doing the connections.

    Mike

Similar Threads

  1. Syil X4 Replacement Parts
    By Brian1309 in forum Syil Products
    Replies: 1
    Last Post: 04-20-2023, 02:04 AM
  2. Syil X4 spindle controller replacement
    By Stifffy in forum Australia, New Zealand Club House
    Replies: 0
    Last Post: 06-23-2020, 07:42 AM
  3. Replacement spindle motor driver
    By efret in forum Spindles / VFD
    Replies: 1
    Last Post: 10-07-2016, 05:40 AM
  4. Replies: 7
    Last Post: 01-10-2015, 05:49 PM
  5. Replacement Drawbar for Syil X3
    By wwendorf in forum Benchtop Machines
    Replies: 4
    Last Post: 04-06-2010, 01:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •